|
Shank's® Fabricated Metal Products
Induction Gate
|
|
Literature Pictures |
|
Shank’s® Induction Gate is a heavy duty metal frame gate that can be fabricated to be either recessed, or surface mounted. The standard size of the gate is 48" high x 84" long, but customization of the gate can be offered. The gate is hot dip galvanized before painting. |
Recovery Stall Door
|
|
Literature Pictures Questionnaire |
|
Shank’s ® Custom Recovery Stall Door is a heavy duty metal frame door that can be fabricated as a single door, or as a double door set. A variety of locking systems/deadbolts can be offered depending on the door header construction and adjacent wall construction. All doors are hot dip galvanized before painting. |
Recovery Stall Door Lock
|
|
Literature Pictures |
|
The Shank’s® Recovery Stall Door Lock is a heavy duty lock made from square tubing and has heavy duty hinges that can be bolted or welded to the door. Deadbolt pins anchor into receiving sleeve anchored to header, and into receiving slot drilled into floor. |
Wall Mount D-Ring
|
|
Pictures |
|
The Shank’s® Wall Mount D-Ring is designed to be installed in a stall or recovery room for secure tie off of an animal. It can be made from hot rolled metal and painted, or be made from stainless steel. |
M & M Cattle Sling
|
|
Pictures |
|
The Shank’s® M & M Cattle Sling is a hip lift for use with down cow. This sling is easily portable and weighs approximately 30 lbs. The sling is hot dip galvanized. |
Single Tree/Hoist Bar
|
|
Pictures |
|
The Shank’s® Single Tree/Hoist Bar is to be attached to a chain hoist to aid in lifting sedated horse during induction or recovery. Hoist bar standard length is 60", but can be customized. |
|